KELMAR^® FWC Traffic Deck System is a rapid curing, odor-free, high-solids epoxy/sand matrix which provides long service life with maintained skid resistance. The KELMAR^® FWC Traffic Deck System consists of a primer coat, a waterproofing membrane and an abrasion-resistant traffic-bearing wear course - seeded with aggregate for durability and skid resistance - and an epoxy lock coat.

Typical Uses: As a waterproofing system parking structures / Pedestrian walkways / Balconies / Stadiums / Mechanical equipment rooms

Advantages:

• Odorless
• Provides a seamless wear course over waterproofing membrane
• Remains flexible over a wide range of temperatures
• Provides an excellent slip-resistant surface
• Resistant to most automotive fluids and salts
• Wear course thickness can be adjusted for varying degrees of traffic exposure
• Available in a range of colors

Click here to view KELMAR^® FWC SYSTEM Technical Data Sheet

The KELMAR^® MERDEK System is a rapid curing, low odor, high-solids epoxy/sand matrix which provides long service life with maintained skid resistance. The KELMAR^® MERDEK System consists of a waterproofing membrane, an abrasion-resistant traffic-bearing wear course - seeded with aggregate for durability and skid resistance - and an epoxy top coat.

Typical Uses: : Parking Garages / Mechanical equipment rooms / Pedestrian walkways / Balconies & Terraces / Plaza and Rooftop decks / Stadiums and arenas

Advantages:

• UV Resistant
• No Odor
• Seamless wearcourse over waterproofing membrane
• Remains flexible over a wide range of temperatures
• Slip resistant
• Resistant to automotive fluids and salts
• Available in a range of colours

Click here Click here to view KELMAR^® MERDEK SYSTEM Technical Data Sheet

KELMAR^® MERDEK^® SBR System is engineered to meet traffic deck waterproofing requirements of most commercial and residential facilities with light to medium traffic patterns where a waterproofing membrane is required. The KELMAR^® MERDEK^® SBR System consists of a waterproofing membrane and wear course layer(s), lightly broadcast with aggregate and back-rolled for slip resistance.

Typical Uses: Parking garages / Mechanical equipment rooms / Computer rooms / Pedestrian walways / Plaza decks & balconies

Advantages:

• Low VOC
• Low odor
• Fast installation cycle
• Slip resistant surface
• Superior chemical resistance
• Flame Spread (ASTM E84) - Class A

Click here to view KELMAR^® MERDEK^® SBR System Technical Data Sheet

KELMAR^® ECO System is engineered to meet traffic deck coating requirements of most commercial and residential facilities. The KELMAR^® ECO System consists of a wear course layer(s), broadcast to rejection with aggregate for maximum durability and slip resistance and an epoxy top coat.

Typical Uses: Parking garages / Mechanical equipment rooms / Computer rooms / Pedestrian walways / Plaza decks & balconies

Advantages:

• Low VOC
• Low odor
• Fast installation cycle
• Slip resistant surface
• Superior chemical resistance
• Flame Spread (ASTM E84) - Class A

Click here to view KELMAR^® ECO SYSTEM Technical Data Sheet

KELMAR^® ECO SBR system is engineered to meet traffic deck requirements of most commercial and residential facilities with light to medium traffic patterns. The KELMAR^® ECO SBR System consists of a wear course layer(s), lightly broadcast with aggregate and back rolled for slip resistance.

Typical Uses: Parking garages / Mechanical equipment rooms / Computer rooms / Pedestrian walways / Plaza decks & balconies

Advantages:

• Low VOC
• Low odor
• Fast installation cycle
• Slip resistant surface
• Superior chemical resistance
• Flame Spread (ASTM E84) - Class A

Click here to view KELMAR^® ECO SBR SYSTEM Technical Data Sheet

KELMAR^® T.E. System is a rapid curing, high-solids epoxy protective coating system with a proven history of performance. The KELMAR^® T.E. System consists of a primer coat, a waterproofing membrane and an abrasion-resistant coal tar epoxy traffic-bearing wear course, which is seeded with aggregate for wear and skid resistance. An optional UV protective top coat is also available. Available in black only.

Typical Uses: Parking Garages / Areas requiring abrasion resistance combined with waterproofing needs / Loading docks / Garbage Rooms

Advantages:

• Passes ASTM C957-15 tests
• Prevents chloride ion penetration
• Class A Fire rating (ASTM E 84)
• Bonded elastic membrane
• High traction skid-resistant wear course
• High chemical & corrosion resistance
• Proven history of performance
• Easily re-coated

Click here to view KELMAR^® TE SYSTEM Technical Data Sheet

KELMAR^® PC is a modified polymer traffic deck waterproofing system specifically engineered for treating Pre-Cast Parking Structure joints. The KELMAR^® PC system wear course is a flexible modified polymer blended with aggregates that will remain flexible and give a long service life. The KELMAR^® PC waterproofing system consists of an epoxy primer, KELMAR^® NEO V latex based waterproofing membrane reinforced with a nylon mesh  and an abrasion resistant flexible traffic bearing wear course blended with aggregates. A topcoat is required for traffic decks exposed to UV. The topcoat is optional for enclosed decks. If the entire deck is receiving deck coating, KELMAR^® PC system is applied 6” wide at the joint and the rest of the deck coated with KELMAR^® FWC deck coating system.

Typical Uses: Pre-Cast Parking structure joint treatment.

Advantages:

• Provides a seamless, flexible wear course over waterproofing membrane
• Remains flexible over a wide range of temperatures
• Extremely durable
• Provides an excellent skid-resistant surface
• Resistant to most automotive chemicals
• Odorless
• Rapid curing

Click here to view KELMAR^® PC SYSTEM Technical Data Sheet PDF.

KELMAR^® MERDEK^® LD system is designed for waterproofing areas subject to light traffic. The system consists of MERDEK^® MEMBRANE (a flexible epoxy-urethane hybrid membrane) and KELMAR^® 1910, a water-based acrylic coating that resists ultraviolet light and gives a superior finish to the floor.

Typical Uses: : Mechanical equipment rooms / Balconies / Pedestrian walkways

Advantages:

• No odor
• Easily maintained and repaired
• Fast installation cycle
• Slip resistant
• Can be applied over various substrates

Click here Click here to view KELMAR^® MERDEK LD SYSTEM Technical Data Sheet

KELMAR^® is a two-part epoxy system designed to meet ASTM F-3010 standards. KELMAR^® MVB reduces transmission of moisture vapors through the concrete slab to levels acceptable for installation of various flooring systems.

Typical Uses: Prior to installation of stone, ceramic, vinyl, wood or laminate flooring / also prior to installation of carpets / primer of new concrete before application of epoxy coatings

Advantages:

• Low emissions - alkly phenol free
• LEED V4 compliant
• Minimum moisture vapor permeance of 0.1 perms (ASTM E-96)

Click here to view KELMAR^® MVB Technical Data Sheet

Resin (Part A) - Safety Data Sheet Hardener (Part B) - Safety Data Sheet

Résine (Partie A) - Fiche de donnée de sécurité Durcisseur (Partie B) - Fiche de donnée de sécurité

KELMAR^® DUALOX is a water-based, low viscosity, two-part, epoxy primer/bonding agent.

Typical Uses: Primer / bonding agent for KELMAR^® Neo V membranes

Advantages:

• Excellent adhesion to concrete substrates
• Long pot life and working time
• Spray or roller application
• Improves bond to wood, concrete, mastics and other porous substrates

Click here to view KELMAR^® Dualox Technical Data Sheet

Resin (Part A) - Safety Data Sheet Hardener (Part B) - Safety Data Sheet

Résine (Partie A) - Fiche de donnée de sécurité Durcisseur (Partie B) - Fiche de donnée de sécurité

KELMAR^® MONOBOND is a two-component, epoxy primer/bonding agent. It is recommended for adhering concrete underlayments, concrete toppings and certain composition floors.

Typical Uses: Bonding concrete on or below grade / Interior and exterior applications / Inter-coat primer to ensure adhesion of KELMAR^® waterproofing systems / As bonding agent on concrete to receive certain composition flooring / To ensure adhesion of thin-bed terrazzo and cement toppings

Advantages:

• Long open time
• Maintains strength when subjected to temperature variations
• Bonds concrete to concrete

Click here to view KELMAR^® Monobond Technical Data Sheet

Resin (Part A) - Safety Data Sheet Hardener (Part B) - Safety Data Sheet

Résine (Partie A) - Fiche de donnée de sécurité Durcisseur (Partie B) - Fiche de donnée de sécurité

KELMAR^® MONOBOND 100 is a two-component, 100% solids epoxy primer. KELMAR^® MONOBOND 100 is recommended as a primer under the KELMAR^® MERDEK Membrane.

Typical Uses: to eliminate the risk of outgassing bubbles in the membrane

Advantages:

• 100% solids - very low VOC
• Can be used for interior and exterior applications
• Maintains strength with temperature variations
• Fast recoat time
• Excellent penetration and adhesion

Click here to view KELMAR^® Monobond 100 Technical Data Sheet PDF.

Resin (Part A) - Safety Data Sheet Hardener (Part B) - Safety Data Sheet

Résine (Partie A) - Fiche de donnée de sécurité Durcisseur (Partie B) - Fiche de donnée de sécurité

KELMAR^® NEO V membrane is a polychloroprene-based elastomeric waterproofing membrane.  Applied using brush, roller, lambswool/wood block applicator or airless spray, KELMAR^® NEO V is a unique polymer which forms a tough, seamless, waterproof membrane with excellent crack-bridging capabilities.  KELMAR^® NEO V is used as a basecoat membrane that must be protected with an appropriate KELMAR^® wearcourse layer. KELMAR^® NEO V can also be covered with other floor or deck products such as seamless epoxy floors, tile or terrazzo.

Typical Uses: Parking structures / Cold storage rooms / Computer rooms / Mechanical rooms / Balconies / Showers / Kitchen / Wet processing areas

Advantages:

• Passes ASTM C1305 Crack Bridging at 30 wet mils
• Blocks chloride ions
• Excellent waterproofing
• Flexible over a wide range of temperatures
• Seamless installation ensures protection from moisture intrusion
• High solids & low odor
• Non-flammable
• Does not embrittle with age
• 600% elongation

Click here to view KELMAR^® Neo V Technical Data Sheet

Safety Data Sheet

Fiche de donnée de sécurité

KELMAR^® MERDEK MEMBRANE is a 100% solids, flexible epoxy urethane hybrid membrane formulated to provide a tough, seamless waterproofing system which meets industry crack bridging requirements. It is used as a base coat in the KELMAR^® MERDEK SYSTEM. KELMAR^® Merdek Membrane does not usually require a primer as it adheres tenaciously to concrete; primer may be required or beneficial under certain conditions. KELMAR^® MEREDEK MEMBRANE maintains its flexibility at low temperatures.

Typical Uses: : Parking structures / Mechanical equipment rooms / Balconies and terraces / Plaza and Rooftop decks / Stadiums and arenas

Advantages:

• No odor
• Excellent waterproofing properties
• Flexible at temperatures below freezing
• Seamless to ensure protection from moisture intrusion
• Formulated to accept Top Coats

Click here to view KELMAR^® MERDEK Membrane Technical Data Sheet

Resin (Part A) - Safety Data Sheet Hardener (Part B) - Safety Data Sheet

Résine (Partie A) - Fiche de donnée de sécurité Durcisseur (Partie B) - Fiche de donnée de sécurité

KELMAR^® T.E. Epoxy is a two-component, coal tar based epoxy coating that provides a durable, chemical resistant surface. As part of the total KELMAR^® T.E. System, the KELMAR^® T.E. Epoxy/Sand Matrix provides solutions for the varied wear requirements within concrete structures, in areas subjected to vehicular or pedestrian traffic.

Typical Uses: Parking garages / Areas requiring abrasion resistance with waterproofing / Loading docks

Advantages:

• Can be used as a tough skid resistant coating
• High abrasion resistance
• Resistant to automotive fluids and salts
• Extremely durable and seamless
• Stain resistant
• Variable thickness
• Easily re-coated

Click here to view KELMAR TE Technical Data Sheet

Resin (Part A) - Safety Data Sheet Hardener (Part B) - Safety Data Sheet

Résine (Partie A) - Fiche de donnée de sécurité Durcisseur (Partie B) - Fiche de donnée de sécurité

KELMAR^® CWC is a high solids epoxy that is used as a wear course in KELMAR^® Waterproofing and Parking Deck protection systems. KELMAR^® CWC has no odor, making it suitable for both indoor and outdoor use..

Typical Uses: As wear course in KELMAR^® FWC system / Parking Garages / Slab-on-Grade areas / Mechanical Rooms / Stadiums

Advantages:

• No odor
• Durable
• Flexible
• Available in a variety of colors

Click here to view KELMAR^® CWC Technical Data Sheet

Resin (Part A) - Safety Data Sheet Hardener (Part B) - Safety Data Sheet

Résine (Partie A) - Fiche de donnée de sécurité Durcisseur (Partie B) - Fiche de donnée de sécurité

KELMAR^® PC is a rubberized wear course which is extremely durable, with strong adhesion to concrete. KELMAR^® PC is a two-part epoxy, mixed with crumb rubber aggregate prior to application.

Typical Uses: as a joint treatment in precast parking structures

Advantages:

• Low VOC's
• Low odor
• Durable
• Flexible

Click here to view KELMAR^® PC Technical Data Sheet

Resin (Part A) - Safety Data Sheet Hardener (Part B) - Safety Data Sheet

Résine (Partie A) - Fiche de donnée de sécurité Durcisseur (Partie B) - Fiche de donnée de sécurité

KELMAR^® UWC is a high solids polyurethane that is used as a wear course in KELMAR^® waterproofing and parking deck protection systems. KELMAR^® UWC is low odor, making it suitable for both indoor and outdoor use.

Typical Uses: as the wear course in the KELMAR^® PC System for pre-cast parking garages

Advantages:

• Low odor
• Durable
• Remains flexible over a wide range of temperatures

Click here to view KELMAR^® UWC Technical Data Sheet

KELMAR^®1920 is a high solids epoxy that is used as a lock coat in the KELMAR^® systems of water-proofing and parking deck protection. KELMAR^® 1920 has negligible odor, making it suitable for both indoor and outdoor use.

Typical Uses: As a lock coat for KELMAR^® FWC System

Advantages:

• Negligible odor
• Durable
• Flexible
• Available in a variety of colours

Click here to view KELMAR^® 1920 Technical Data Sheet.

Resin (Part A) - Safety Data Sheet Hardener (Part B) - Safety Data Sheet

Résine (Partie A) - Fiche de donnée de sécurité Durcisseur (Partie B) - Fiche de donnée de sécurité

KELMAR^® 1930 is a two component, high solids aliphatic urethane that is used as a top coat in the KELMAR^® Systems of waterproofing and parking deck protection. KELMAR^® 1930 is UV resistant, making it suitable for both indoor and outdoor use.

Typical Uses: Top coat for the KELMAR^® PC System in pre-cast parking garages

Advantages:

• UV Resistant
• Highly durable
• Remains flexible over a wide range of temperatures

Click here to view KELMAR^® 1930 Technical Data Sheet.

KELMAR^® 1910 COATING is a single component, pigmented, water based, acrylic latex emulsion that is designed for concrete and asphalt surfaces and intended as a top coat for KELMAR^® Traffic Deck Systems. 1910 Coating may be installed in interior and exterior areas.

Typical Uses: Top coat for KELMAR^® Systems / Asphalt coating / Exterior wall coating / Breathable parking garage ceiling coating

Advantages:

• Permits migration of moisture vapor from the substrate
• Excellent UV resistance
• Weather resistant, excellent color retention
• Re-coatable
• Heat reflective when applied over asphalt
• Single component

Click here to view KELMAR^® 1910 Coating Technical Data Sheet.

Safety Data Sheet Fiche de donnée de sécurité

KELMAR^® Sealmaster 100 is a solvent-free water repellent based on a monomeric silane. Sealmaster 100 is used as a primer and impregnating agent for normal and reinforced concrete in bridges, roads and buildings.

Advantages:

• Greatly delays absorption of water and water-borne salts (eg. chlorides)
• Highly resistant to alkalis
• Good depth of penetration
• Low volatility
• Solvent free

Click here to view KELMAR^® Sealmaster 100 Technical Data Sheet

Safety Data Sheet Fiche de donnée de sécurité

#151 Aggregate is reprocessed rubber-based aggregate used with the KELMAR^® MERDEK^® System. #151 Aggregate is a consistent quality, flexible aggregate with resilient durability. It is safe and non-toxic.

Advantages:

• 100% recycled material
• Slip resistant
• Flexible

Click here to view #151 Aggregate Technical Data Sheet

Safety Data Sheet Fiche de donnée de sécurité

KELMAR^® RC is a high solids modified epoxy polymer that is frequently used as a resurfacing compound. KELMAR^® RC idoes not require a primer (in most situations) and has very low odor, making it suitable for both indoor and outdoor use.

Typical Uses: As a resurfacing compound / for rehabilitation of scaling, spalled and deteriorated concrete / Heavy traffic areas such as driveways watlways etc. / Structural repair of concrete structures

Advantages:

• Durable
• Flexible
• A-1 Fire Rating ASTM E86
• High compressive and flexile strength

Click here to view KELMAR^® RC Technical Data Sheet

Resin (Part A) - Safety Data Sheet Hardener (Part B) - Safety Data Sheet

Résine (Partie A) - Fiche de donnée de sécurité Durcisseur (Partie B) - Fiche de donnée de sécurité

KELMAR^® LME is a two-component, extremely low viscosity, epoxy resin system designed to penetrate cracks by gravity and bond the concrete surfaces. KELMAR^® LME will penetrate fissures as narrow as 0.002 inches wide.

Typical Uses: Concrete delamination repair / Commercial floors / Parking decks / Concrete structural slabs / Bridge decks / Airport runways / Highway pavements

Advantages:

• Low viscosity eliminates need for injection equipment
• Forms a chemical bond to concrete
• Long pot life allows working time for complete penetration of cracks

Click here to view KELMAR^® LME Technical Data Sheet PDF.

Resin (Part A) - Safety Data Sheet Hardener (Part B) - Safety Data Sheet

Résine (Partie A) - Fiche de donnée de sécurité Durcisseur (Partie B) - Fiche de donnée de sécurité

KELMAR^® CRACK FILLER is a 2-part, rapid curing, high solids epoxy.  The components of CRACK FILLER are mixed in a 1:1 ratio.

Typical Uses: Filling cracks and non-moving construction joints.

Advantages:

• Resistant to most chemicals
• No primers required

Click here to view KELMAR^® Crack Filler Technical Data Sheet PDF.

Resin (Part A) - Safety Data Sheet Hardener (Part B) - Safety Data Sheet

Résine (Partie A) - Fiche de donnée de sécurité Durcisseur (Partie B) - Fiche de donnée de sécurité

The following document is available as an Adobe PDF download.

The following document is available as an Adobe PDF download.

The following document is available as an Adobe PDF download.

The following document is available as an Adobe PDF download.

The following document is available as an Adobe PDF download.

The following document is available as an Adobe PDF download.

The following document is available as an Adobe PDF download.

The following document is available as an Adobe PDF download.

The following document is available as an Adobe PDF download.

The following document is available as an Adobe PDF download.

The following document is available as an Adobe PDF download.

The following document is available as an Adobe PDF download.

The following document is available as an Adobe PDF download.

The following document is available as an Adobe PDF download.